今年度も自作板ワークショップの募集を開始します!定員10名、残席4名です。お気軽にお問い合わせください。
Sign-ups are now open for this year’s ski-building workshop! The group is limited to 10 people, and 4 places remain. Please feel free to get in touch.
今年度も自作板ワークショップの募集を開始します!定員10名、残席4名です。お気軽にお問い合わせください。
Sign-ups are now open for this year’s ski-building workshop! The group is limited to 10 people, and 4 places remain. Please feel free to get in touch.
問い合わせを多くいただいていたステップソールチューン、受付再開のお知らせです。使わなくなったスキーを加工して、雪上を歩くための板としてもう一度活用します。
2026年2月時点のご案内:11月・12月は受付できません。ステップ加工は4列で10,000円、ベーシックチューンは6,000円。5列目以降は1列につき1,000円追加です。センター幅70mmほどで約4列、センター幅100mmほどで約6列が目安ですが、板を確認してから加工内容と金額をご案内します。表示価格は税別、送料は別途です。遠方からのご依頼もお受けします。
発送時は原則としてビンディングを外してください。取り外し・再取り付けをご希望の場合は3,000円で対応しますが、古いビンディングはプラスチックの劣化などで破損することがあり、その場合の補償はできません。板や金具の状態を確認しながら進める加工ですので、事前にご相談ください。
使わなくなった板を捨てずに、歩くスキーとして新しい遊び方へ。料金や受付状況は変更される場合があります。最新情報はHAPPYのホームページをご確認ください。
After receiving many inquiries, step-sole tuning is available again. We modify unused skis so they can be used for walking on snow.
Information as of February 2026: I cannot accept these orders in November or December. The four-row step pattern costs ¥10,000, and a basic tune is ¥6,000. Each additional row is ¥1,000. A ski around 70 mm underfoot usually needs about four rows; around 100 mm, about six. I inspect each ski before confirming the work and price. Prices exclude tax and shipping. Orders from outside the area are welcome.
Please remove the bindings before shipping. If you would like me to remove and reinstall them, the charge is ¥3,000. Older binding plastic can be brittle and may break during removal; I cannot cover damage in that case. Please contact me first so we can discuss the ski and bindings.
Rather than throw away old skis, give them a new role as walking skis. Availability and prices may change, so please check the HAPPY website for current information.
メローな斜面で一番楽しいと噂のあわすの会場 しかも生演奏あり!
LIVEありのメローな斜面で一番楽しいと噂のあわすの会場
Facebookの元投稿を見る:
2月16日 17:54の投稿
2月16日 17:56の投稿
2月16日 17:59の投稿
2月16日 18:02の投稿
The Awasuno venue is said to have the most fun mellow slope—and live music, too!
Awasuno, with a mellow slope said to be the most fun, and a live performance!
View the original Facebook posts:
February 16, 5:54 p.m.
February 16, 5:56 p.m.
February 16, 5:59 p.m.
February 16, 6:02 p.m.
おかげさまで、かれこれ30種類(30台ではなく全て別物)近くの板を製造させていただきました。
私が目標とする製品レベルにぎりぎり背伸びして到達できました。
短期間でここまでできたのもモニター応募くださったお客様と多大なるご支援をしてくださる関係各社様のおかげと大変感謝しております。
(*個人名などは控えさせていただきます。)
先日のビルダーズミーティングにてスキー作品をしっかりと試乗させていただきました結果
確かな手応えとクラフトスキー/スノーボードにしかできない可能性を感じ
久しぶりにきましたよ稲妻!!!
新しいことをするときは、いつも脳内に稲妻が落ちるかどうかを指標に行動するんですが、今回もきました!
うおーー!!!
綿密なプランニングをしてると誤解されがちですが、安心してください。いつも無計画です!
皆様の期待に応えるべくどんどん進むぞ!!
PL保険の加入、受注ポリシーの決定、フレームワークの実施、値決め、チラシ作成、試乗器の製作、イノベーター集客、用のチラシ作成、2月イベントまでに
地震で割れた外壁の補修。漆喰塗装後のシーラント隙間埋め。引き戸のモール貼り。外灯の設置。塗装ブースの製作。トリマーテーブルの製作。二階の階段ドア設置。外構の整地。外物置の建築。大八車の修理。外テーブルを追加製作(看板の木材で)
1、メガファットスキー darkmatter210 160mm幅?
黒塗装一部窓 白シルクスクリーンロゴ
テンプレートはサイコ型にするかどうするか
芯材は軽量コア設計パウダーフレックス
フラットキャンバー2mmかフルロッカーか
2、⭐︎ナロースキー2号タイプR ブビンガサイドウォール
突板シート レーザー刻印ロゴ 厚く
芯材はホオノキとケヤキ カット加工する
パウダーロッカー
3、スノーボード再製作 クリアーレーザー刻印かシート印刷デザイン 「TOTAN」芯材をカット加工する
サイドカットどうするか
芯材はアテと米松でウッドビーム
⭐︎サンプルボードにインサート加工をして試乗しやすくする
⭐︎サンプルボードをスプリットボードに改造
4、⭐︎メタル入りアルペンスキー1号 173cmカービング センター78かな
染め布かホワイト一色かチタナルクリア
芯材は米松とケヤキ細 TITANAL上下
5、ツアースキー
立山杉ビーム構造&サワラ&ウェンジストリンガ&カーボンで
センター112 1700g以下を目指す
バインディング下メタルおよび埋木堀り用テンプレートのアプデ トゥ&ヒール2枚がいいんでないか
埋木プレートの製材(600x70くらい ブビンガ、ウェンジ、ブナ、ミズナラ、)
レーザー刻印のテスト。断熱施工。
ロール印刷のテストとAIデザイン。ロールプリンタのテスト。顔料インクでのグラフィックテスト
全面剥離修理。プレスルームのドアモール貼り。
webを作り込む。フライヤーパンフレット製作、インタビュー動画、観光商品としての魅せ方で紹介、木材に関するストーリーコンテンツ
CADに基づいておまかせコース用オーダーシステムを作る。設計のポイントについてデザイン製作と入稿について、製作工程表(ゴールを明確)
土間コン、屋根下地
インバウンド対応、事業計画決定、融資申し込み、製造販売業
マシン入れ替え申請、内装ベニヤ壁貼り。
Thanks to your support, I have now built close to 30 different designs of skis and snowboards—not 30 units of the same model, but nearly 30 distinct designs.
I have just managed to stretch myself enough to reach the product level I had set as my goal.
I’m deeply grateful to the customers who applied to be monitors and to all the companies that have supported me. Their help made it possible to come this far in such a short time.
(I’ll refrain from naming individuals.)
At the recent Builders’ Meeting, I had the chance to properly test-ride the skis I’ve made. The results gave me a real sense of progress and showed me the possibilities that only handcrafted skis and snowboards can offer.
That lightning bolt came again!
Whenever I take on something new, I use the feeling of a lightning bolt striking in my mind as a guide. And this time, it happened again!
Woohoo!
People sometimes assume that I make meticulous plans, but rest assured: I’m always winging it!
I’ll keep moving forward and do my best to live up to everyone’s expectations!
Get product liability insurance; decide our order policy; put a framework in place; set prices; make flyers; build demo skis; attract innovators; create a flyer to reach them; complete these by the February event.
Repair earthquake-cracked exterior walls; fill gaps in the sealant after plastering; install trim on the sliding doors; put up exterior lights; build a spray-paint booth and a router table; install a door at the upstairs stairs; level the grounds; build an outdoor storage shed; repair the handcart; add an outdoor table using the signboard lumber.
1. Mega-fat ski, darkmatter210, perhaps 160 mm waist?
Partly black-painted with a window; white silkscreen logo.
Decide whether to use the psycho-shaped template.
Lightweight-core design with powder flex.
Choose between 2 mm flat camber and full rocker.
2. ⭐︎ Narrow Ski No. 2, Type R, with bubinga sidewalls.
Veneer sheet; laser-engraved logo; make it thick.
Core of magnolia and zelkova, to be shaped.
Powder rocker.
3. Rebuild the snowboard: clear finish with laser engraving or a printed sheet design; cut the core for “TOTAN.”
Decide on the sidecut.
Wood-beam core using Japanese ash and Douglas fir.
⭐︎ Add inserts to the sample board to make it easier to test.
⭐︎ Convert a sample board into a splitboard.
4. ⭐︎ Alpine ski No. 1 with metal: 173 cm carving ski, perhaps a 78 mm waist.
Choose dyed fabric, all white, or clear titanium.
Douglas fir and narrow zelkova in the core, with Titanal above and below.
5. Touring ski.
Mt. Tateyama cedar beam structure with sawara cypress, wenge stringers, and carbon.
112 mm waist; aim for under 1,700 g.
Update the templates for the metal under the bindings and the recesses for binding inserts; two templates, one for the toe and one for the heel, may work best.
Mill the insert plates (about 600 × 70 mm; bubinga, wenge, beech, Japanese oak, etc.).
Test laser engraving and install insulation.
Test roll printing and AI design; test the roll printer and pigment-ink graphics.
Repair the full delamination and install door trim in the press room.
Develop the website; make flyers and brochures; create interview videos; present the work as a tourism experience; develop story content about the wood.
Build a made-to-order system for the custom course based on CAD; create design and submission guidance covering key design points; make a production schedule with a clear goal.
Concrete floor and roof framing.
Prepare for inbound visitors; finalize the business plan; apply for financing; establish manufacturing and sales operations.
Apply to replace the machines and install plywood on the interior walls.
1/18 第二回ビルダーズミーティング。
当方が主催する板作りワークショップの仲間たちと、年に一回のミーティングです。
今年は告知なしのプライベート開催!!会場はあわすのスキー場。
去年は富山のメインゲレンデで開催しました。宣伝にはなるけれど、肝心の製作者の皆さんと一緒に滑って、お話しする時間がなかなか取れませんでした。
今年はゆっくり皆さんとお話しできて、とても良かったです。お話しの中には貴重なヒントだらけ。
むむっ。
次なる取り組みが!!
January 18: our second Builders’ Meeting. This is our once-a-year get-together with the friends from the ski-building workshop I host.
This year we kept it private, with no public announcement!! We met at Awasuno Ski Area.
Last year, we held the meeting at one of Toyama’s main ski areas. It was good for publicity, but we didn’t get enough time to ski together and talk with the builders—the very people at the heart of the gathering.
This year, I was really glad we could take our time, ski, and talk with everyone. The conversations were full of valuable hints.
Hmm… What should we take on next?!
Every year we hold a mischievous event that fills the slopes with Telemark skiers. Apparently this is our 14th year (laughs). Here’s where Telemark skiers will gather this season. Come join a session! Details for each event will be announced shortly before it takes place.
January’s schedule is a little light, but when the snow is good, everyone should quietly go ski! Until then, Telemark madness this season, everyone!!
Happy New Year! Work wasn’t quite wrapped up, but I’m taking it easy for the first three days of the year.
Last year was extremely busy—whether because there was too much to do, I was inefficient, or I took on too many new challenges. I steadily handled what needed to be done, and I feel I’ve built a foundation for welcoming more customers.
This is the Year of the Horse, said to bring great progress. Things will probably move forward quickly and get busy. So this year I’ll consciously rest, play, and have fun. My resolution is: “Keep myself cheerful and smiling so I can meet our customers’ needs!” Looking back, I was so busy last year that my smile faded.
This year I’d like to expand the HAPPY TUNE shop, adding a room to store skis and another for new equipment. Thank you for your continued support. Let’s go have fun together!
Old Storehouse Workshop: Repair the earthquake-damaged exterior wall; seal gaps after plaster painting; add trim to sliding doors; install outdoor lights; build a paint booth and router table; install a second-floor stair door; level the grounds; build an outdoor shed; repair the handcart; and add an outdoor table using signboard lumber.
Prototype skis (I couldn’t make them this season; ⭐ = high priority):
Templates: Update the template for metal under bindings and insert-hole routing; perhaps use separate toe and heel pieces. Mill insert plates (about 600 × 70 mm) from bubinga, wenge, beech, or mizunara oak.
Design and printing room: Test laser engraving, install insulation, test roll printing and AI design, test the roll printer, and test pigment-ink graphics.
Attic workshop: Full delamination repair and add door trim to the press room.
Website, PR, and marketing: Build out the website, produce flyers and brochures and interview videos, present the work as a tourism product, and create story content about wood.
Digital: Build a CAD-based ordering system for the standard course, explain design and file-submission points, and create a production schedule with a clear goal.
Tour program development: Develop tours called “My Childhood” and “An Adventure Among Garden Trees.” Plan the Ananotani SBNR tour, beginning with an itinerary. Develop a mountain-faith tour from Kurokawa village, learning about temples and artifacts excavated there and connecting them with ski ascents as a modern staff.
Shop expansion: Concrete floor and roof framing.
Management: Develop inbound-tourism programs, decide on a business plan, apply for financing, and prepare sales materials for inbound travel agencies.
Tuning workshop: Apply to replace machines and line the interior with plywood.
2026年9月22日 「めっちゃ板走って、また出しに来ました!」 今日、お客さんからそう言ってもらえて、めちゃ嬉しかったと同時に安心しましたです。 うちには、スノーボード用の「ストーンマシン」がありません。サンディングマシーンという機械で研磨します。 ス...